UA-9726592-1

Tuesday, May 6, 2014

Rightardia has moved over to FaceBook



During the 2112 election, cycle, Rightardia noticed a lot of activity on its Facebook page. Most of our political posts are now found on FB.

Although we still do some political posting here, you are more likely to find orginal articles on the Veterans Administration or tech topics in the blog.

The Rightrdia FB page has around 600 friends and followers and we would have even more if we weren't so particular and who we friend.

The Rightardia FB page is not a debate page.  Rightrdia and Rightard Whitey got bored with debating right wing trolls and idiots on Usenet, so we don't allow any of that riffraff on our FB page.

As our FB banner states, "Never waste time with people who have no interest in you point of view. "

Conservative Trolls are there to proselytize you or to disrupt your blog. They are not interested in real debate.

If you have worked in Organizing for America (OFA), you probably know that the volunteers do not call Republicans.

Why? Because you are unlikely to make any headway with an an ideologue.

In addition, there are far more Democrats than Republicans and the Democratic base in increasing while the GOP bas is declining.

The bottom line is that the Democrats don't need Republicans to win elections. We just need to turn out the Democratic base. Sometimes that is easier said than done particularly when the Republican Party is doing everything it can to make it harder to vote.

Rightardia does have Republicans who post on our FB page. If you are a moderate or an independent, you are welcome on the the Rightardia page,

Check out the FB page at https://www.facebook.com/rightardia. You can also find the home FB page by searching for Eric Elder aka Rightard Whitey.

Please send a FB friend request if you have been or are a follower of the Rightardia blog.

Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA 

  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Sunday, May 4, 2014

Wednesday, April 30, 2014

Prologue to filing a VA claim


Rightardia has written many articles on filing a successful claim.The major learned a lot though trial and error. 

Here are some of the key lessons the major learned. 


1. It will be very hard to prevail in a claim at the VARO without private practice physicians supporting you claim unless you have a presumptive type of condition. Minimally you will need a general practitioner (GP) and one specialist. In the major's claim, he had extensive correspondence from his GP and 5 specialists.
Recommendation: Enroll in ACA if you do not have private practice insurance.

2. Do a lot of upfront work before you file. Have your physicians sign Disability Benefits Questionnaires and get all you ducks in a row. Indicate you are filing a fully developed claim (FDC). This means once you file, you do not plan to submit additional documentation. The DBQ provides considerably more information to the VA than most letters, Make sure you include a nexus statement in the DBQ that ties your disability to you military service. Make sure the doctor indicates he reviewed you service medical records (SMR) on the DBQ, too.
Recommendation: Fill out a DBQ and use DBQs as evidence, Letters should be used a backup.

3. You can have a veteran service officer represent you, an attorney, or you can represent yourself pro se. The major was not greatly impressed with VSOs at the regional office. In general, contacting an attorney prior of submitting a claim seems premature with the advent of the DBQ. 

A Federal Circuit panel noted that its prior decisions in Moody v. Principi, Szemraj v. Principi, and Roberson v. Principi made it clear that pro se filings must be read liberally. All three cases require the VA "to fully and sympathetically develop the veteran's claim to its optimum before deciding it on the merits."

As a vet you get an extra benefit of the doubt filing pro se.
Recommendation: Initiate  your claim pro se.

If the VA denies or low balls your claim, appeal it to the Board of Veteran Appeals (BVA).  You may wish to engage at attorney at this point because the BVA hearing is quasi-legal and USC Code 38 and the 38 CFR (Code of Federal Regulations) now apply. In many states, VSO's are not required to have legal training. The VSO understand VA directives such as M21-1MR, but not USC codes used by the BVA.
Recommendation: Hire an attorney if you appeal to the BVA.

Since you filed an FDC, you should save any new evidence until then and introduce it at at the BVA level. In fact, the BVA wants new evidence. In addition, if you are unhappy with the BVA decision and appeal to the next level, the U.S. Court of Appeals for Veterans' Claims (USCAVC), the evidence is frozen. You cannot introduce new evidence to the USCAVC. 
Recommendation: Submit new evidence when you appeal to the BVA. That may be you last opportunity to introduce new evidence. 

Other comments: Try to organize your claims  in terms of primary and secondary conditions. For example if you served in Vietnam and developed Diabetes Mellitus II from Agent orange exposure, you may also have coronary artery disease, pericarditus and other secondary conditions.

Recently heard about an officer who applied for more than 30 conditions. The VA refers to this as piling on. This approach is a waste of your time and the VA's

A claimant is better off  perusing the 38 CFR disability criteria and identifying the more important disabilities. The VA ha a peculiar way of determining you total disability rating and numerous 10 per cent rating aren't useful.

However,  60 per cent primary disability with multiple secondary ratings is a different story

sources:

http://blogs.findlaw.com/federal_circuit/2013/01/pro-se-veterans-filings-must-be-read-liberally.html

http://www.vetshome.com/diabetes_claims_secondary.htm

http://www.benefits.va.gov/warms/bookc.asp



Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA 
  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Friday, April 25, 2014

Portecting your home from surges

You can protect major appliances such as the dryer, washer refrigerator and dish washer with a home surge protector you power company installs for a monthly fee. The one in my home is installed behind the power meter.


This whole house protector has a colored light that should be on at all times. If the light goes off, call the power company to replace the unit. 


Surges can also come through other avenues such as coax cable you use for the cable TV, the Internet and Voice over IP phone service. The whole house protector is unlikely to protect your low voltage equipment such as cable modems, hubs, switches and so forth.

Many people think a power strip will do the job such as the one below, but most are not fast enough or the job. The power supply on your PC actually does a better job of handling surges and brown outs than one of these cheap surge protectors. Remember, lightning travels at the speed of light.
Not recommended to protect sensitive equipment

The best solution is a uninterpretable power supply (UPS) that contain a battery to handle brown outs and can also protect sensitive computers and LCD or LED screens from electrical damage. I you have an old tube monitor, it pulls too much current and should not be connected to a UPS.

Rightardia likes the  Cyperpower UPS because it has an LCD screen that allows someone  to check the battery and input and output voltage as well as amps and hertz. It also has a load meter to show if you are overloading the the UPS.

For some reason, many UPS makers for home users have not created web based software to manage these devices. Unless you use Windows or sometimes a Mac, you have no easy way to check the UPS to make sure the battery is still working. The LCD display overcomes this limitation.

There are also some companies that do make great surge protectors. Two Rightardia would recommend are Panamax and Triplite.


Many of these well designed surge protectors will protect you from surges over coax, phone lines (RJ-11) and Ethernet.

Another solution is a surge protected receptacle.Both Panamax and Levitron make these.  The Panamax protector requires wire screws to connect to one pair of electrical wires. The Levitron has connectors than can handle two pairs of electrical wires. Most Home Depots carry Levitron receptacle surge protectors. Both units have green lights that stay on as long as the surge protector is working.This is a far better option than a power strip.



In most cases you will need a mix of UPS and surge protectors to protect sensitive equipment and major appliances in your home.

sources:

https://www.progress-energy.com/florida/home/products-services/surge-protection/index.page



Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA 

  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Thursday, April 17, 2014

Printing in Linux

If there is an Achilles heelin Linux, it would be printing. Linux gives you many options for installing a printer and that is part of the problem. In general, CUPS is the preferred way to install a local printer.





Network printers

If you are printing to a network printer, it gets more complex. You have options such as jet direct option, Samba, IPP and CUPS. I prefer to use a network printer because anyone on a home LAN has access to the printer on a 7 x 24 basis.

In most cases I have used jet direct and printed to port 9100.

Any printer can be set-up as a network printer with a home print server. Rightardia has used both the NetGear and the Airlink print servers. Have found the Airlink 101 to be very reliable and more resistant to power surges and brownouts.

Some print servers are wireless and others require and Ethernet wired connection. The particular print server in this article require a wired USB connection to your printer.


The wireless unit  looks about the same with the exception of an antenna it sports.

The configuration is fairly straight forward. by default, the unit gets an IP address by the Dynamic Host Configuration Protocol (DHCP). You can look up the DHCP address of the print server in your router's  or cable modem's DHCP host table. 


You will notice the two Rightardia print servers print servers have host names: PS-4BA44B and PS-495EA8. You can use the your browser to configure the print server by entering the IP address of the print server into the navigation toolbar. The default login is amps230 and the password is admin for the airlink 101 for Java based configuration tool.



What the print does is create a virtual IP address for the printer connected by USB that by default is 192.168.0.254. If your network has a different IP addressing scheme or you have multiple Airlink print servers, you should change the IP address of the subsequent ones. Use an IP address that is outside to the scope of the DHCP server. For example if you have two print servers on network 192.168.1.0, change the IP addresses respectively to 192.168.1.254 and 192.68.1.253.

Of interest, Windows networking will print to the Airlink print server name such as PS-4BA44B. This is probably the netbios name

However, Linux is more particular. After installing the printer using Jet Direct, print to printers IP addres and use a socket setting to port 9100.

The locations should be the IP address such as: 192.168.1.253

The device URL should follow this format:

socket://192.168.1.253:9100

In Linux, you print to the IP address of the printer rather than to the print server name.

Where is the Linux driver?

Linux printing can be a challenge because the print driver library is as not as robust as Windows. Canon printers are a  good example. The MFC 4570dn multi-function printer Rightardia uses didn't have a driver for a long time until Canon finally released one.

In addtion, the Debian Pixma IP6000dn inkjet printer driver doesn't work in curent vesions of Ubuntu and Linux Mint. However, the Fedora and Centos drivers do work.

If you cannot find a driver or one that works, one option is Turboprint.

It has many of the drivers that Linux rleases lack and has many options for Inkjet printers that are missing in Linux. However, the basic program costs € 29 and the family plan with two years of downloads is € 55.

Rightardia found Turbopirint to be an easier way to go with Linux printing. If you are printing to a Linux network printer, you will need to use the IP address of the printer rather than the print server.

You can use the command line: system-config printer, to revise the TurboPrinter options for the driver, onec installed, if necessary. The configuration using Turbo printer looks like this:

Network printer socket /jet direct (network printer connection)
192.168.1.253 (IP adress)
9100 (port)

Before you prucahse Tuboprint, check to make sure the driver you need is supported: see http://www.turboprint.info/


Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA 

  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative 

Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Saturday, April 12, 2014

Acheiving a national dream


Denmark didn't becoem one of the happiest nations on the planet by embracing conservative values. 

It didn't  create a monstrous national debt by fighting a series of stupid wars either.


Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA
 


Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Wednesday, April 9, 2014

Bright House will now let you install your own cable modem

In the past you had to lease your cable modem from the cable company, but no more. Since I am now retired, I saw the advantage of eliminating a monthly $5-$7 lease charge. So I went to amazon.com and purchased an ARRIS / Motorola SURFboard Gateway SBG6580 DOCSIS 3.0 Wireless N Cable Modem.

Was a former WAN tech, so configuration was not difficult. I had most of the menu options that a Bright House tech would have.

I had called BH earlier to make sure I was purchasing  a cable modem on their approved lsit. Once I had physicaly installed the unit, I called BH again and gave them the model number and the HFC MAC adress. The BH tech had the unit working in about 5 minutes. Of course, you have to return the old cable modem to end the lease.

Speedwise, the unit is far faster the old UBEE Cable modem I had been using. This is the line speed over a Ethernet cable.

The wireless connection worked poorly, if at all. This is a documented on the Internet and for this reason alone, Rightardia does not recommend this cable modem. 

If you decide to purchase a cable modem, check with your cable company first and then do some research on the Internet. Watch out for users complaining about wireless conections. 

Since I had a wireless router, I simply connected (bridged) it to the cable modem and turned the wireless features on the router to get wireless working again. 

Also, installed a wireless extender to bring wireless to the far end of my home. Youc an purcases either a wireless extender ot a repeater.  
NetGear universal Wifi Range extender

An extender does not require an Ethernet cable connection to work. A repeater may require an Ethernet connection to operate. The simplest may to do this is with Ethernet over power line adapters. Netgear makes different Ethernet over powerline devices that Rightardia would recommend.

Configuring a cable modem. 

You should change both the user name and the password upon connecting. This makes is doubly hard for a hacker to get into you home network.

If you have a home network , turn on the Dynamic Host configuration Protocol (DHCP) server to provide IP addresses to devices on your home network like printers and multimedia devices such as a Roku appliance. Also, backup the cable modem configuration. it will save you a lot of time if you home ever takes strong surge or a lightening strike.


Pay close attention to firewall option. Set the firewall to high and turn on "block fragmented IP packed, port scan detection and IP flood detection. The firewall will log the IP address of anyone who is scanning your network.  

You also have parental control option. You can block the Internet from you children after certain hours. If you are using DHCP, you will have to reserve the MAC adress and IP address of your children's computers in the DHCP sever. Otherwise the IP address will change when the DHCP lease runs out. 

Your children can around this by using a static IP address, but most kids don't know how to do this. 

BTW, don't let you kids use a computer in you home without having their administrative password. Children do have a right to some privacy, but not on the Internet. 

Having such a policy in your home may keep your kids out of trouble, too, if they know mom or dad can check their computers from time to time. 

Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA 

 Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Thursday, February 27, 2014

Repblicans have lost the ACA batle

The recent Kaiser Foundation Family Poll had some interesting findings: 

A majority said ACA should be kept in place, including 48 percent who want Congress to work to improve it. Eight percent who say it should be kept as is.

Fewer say Congress should repeal the law or replace it with a Republican-sponsored alternative (12 percent) or repeal it and not replace it (19 percent).

Views about next steps are deeply divided by political party identification.

Most Democrats preferring to keep the law in place and a majority of Republicans wanting to see it repealed. Among independents, more than half want Congress to keep the law as is or work to improve it, while a third prefer to see it repealed.

Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA

  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Saturday, February 8, 2014

Filing a new VA claim

Many veterans get a letter from a doctor and go the a VA regional office (VARO)  and use a Veteran Service officer (VSO) from the AMVETS or DAV to file the claim. Chances are the initial claim will be rejected. In fact even after a second level review by the Board of Veterans Appeals, only bout 30 per cent of claims are approved. About 15 per cent of VA claims are fraudulent.  But what about the other 50 per cent that are rejected?

The VARO would probably say that most rejected but legitimate claims are not fully developed. The VARO wants fully developed claims (FDC). 

You can increase your chances by filing the claim pro se.  This means advocating on your own behalf before a court or board, rather than being represented by a lawyer or a VSO.

One big advantage of filing pro se is that the VA has to give your claim extra considerations because you did not have professional representation.

You do need some tools to file a claim. If you don't have these tools, you should probably work the claim through one of the service organizations or through the VA's Veteran Center. 

Rightardia recommends you have or can get access to the following:

1. The Internet. You can use the public library's if you don't have this at home.

2. A PC with any current operating system. You will need this to type letters, fill out the online VA claims (VONAPP) and respond to VA requests. 

3. MFC (multi-function) laser printer. Useful for printing, faxing and scanning. A color inkjet printer has limited use and prints far more slowly.

4. Software: You need a word processor like MS Word or Libre office aka Apache Open Office that is free. Both Libre and Open Office have both Windows and Linux versions. You can upgrade Libre office with the Language Tool plug-in that provides grammar checking. There is also a free medical dictionary for Libre/Open Office.

5. A file cabinet with both incoming and outgoing logs. All incoming and outgoing documents should be numbered and filed in chronological order. Use to the log to quickly locate documents you need to enhance or reference in your claim. 

A program such as Windows PDF Nitro that can edit DBQs and create portable document files (PDF). The PDF is a government standard and that is why most government forms are in PDF format. PDF Nitro will allow you to edit existing PDFs or save a DBQ is PDF format.

You cannot otherwise edit a PDF file such a Disability Benefit Questionnaire (DBQ). However, without a program like Adobe Acrobat, not the reader,  or PDF Nitro, you will not be able to edit existing PDFs or save them. You can also edit PDF files in Linux with graphics programs, but it is time consuming.

Before you file the claim, you should read two books. The ASKNOD  VA Claims by Gordon Graham and Claims Denied by John Roche. The latter will help you file the claim and the Asknod book will be very useful if you have to file an appeal.














Next try to define your claims in terms that the VA can understand. Check 38 CFR, Part C Subpart B to find the disability codes fit your condition (s). See http://www.benefits.va.gov/warms/bookc.asp

For example if you have diabetes mellitus, DC 7913 applies: 

7913 Diabetes mellitus

Requiring more than one daily injection of insulin, restricted diet,
and regulation of activities (avoidance of strenuous occupational
and recreational activities) with episodes of ketoacidosis or
hypoglycemic reactions requiring at least three hospitalizations per
year or weekly visits to a diabetic care provider, plus either
progressive loss of weight and strength or complications that
would be compensable if separately evaluated 100

Requiring insulin, restricted diet, and regulation of activities with
episodes of ketoacidosis or hypoglycemic reactions requiring one
or two hospitalizations per year or twice a month visits to a diabetic
care provider, plus complications that would not be compensable
if separately evaluated 60 
 
Requiring insulin, restricted diet, and regulation of activities 40
Requiring insulin and restricted diet, or; oral hypoglycemic agent
and restricted diet 20 
 
Manageable by restricted diet only 10

Note (1): Evaluate compensable complications of diabetes separately unless they are part of the criteria used to support a 100 percent evaluation. Noncompensable complications are considered part of the diabetic process under diagnostic code 7913.

Note (2): When diabetes mellitus has been conclusively diagnosed, do not request a glucose tolerance test solely for rating purposes.

Pay close attention to the notes, too. Show the DC examples to your physician. Ask him or her what they think you should be rated for.

With the Affordable Care Act,  you should be able to get medial insurance and help from private practice physicians. In general, they will be the strongest advocates for you if you have a clear cut case. If a private practice doctor won't help you, fire him or her and find one who will.

You have the option of submitting a letter signed by your physician or asking the physicians to complete a DBQ. Rightardia strongly recommends the DBQ because it will provide more information to the VA than is often possible in a letter. A well written DBQ may also preclude a compensation and pension (C&P) exam.You can find the DBQs at http://benefits.va.gov/COMPENSATION/dbq_ListByDBQFormName.asp.

It is important that the physician indicate in the DBQ that he/she reviewed the claimant's service medical records (SMR). The physician can check a check box in some DBQs to show he performed a records review. The DBQ also needs to have a nexus statement added that connects the medical conditions to the claimant's time in service.

Here is the part of  DBQ for Diabetes Mellitus:


 Many vets make the mistake of submitting multiple claims that are unrelated to each with the typical vet submitting 20 different claims, hoping some will stick. It is far better to push the claims that have the most impact. For example, you might get 10 per cent for service-connected prostate condition and 50 per cent for sleep apnea. Clearly the latter condition is more important. Use the 38 CFR to help identify and prioritize medical conditions.

Are there any relationships between diabetes mellitus and other medical conditions you have? Are there secondary conditions such as neropathy, renal dysfunction and retinapathy? Diabetes can cause cardiac conditions such as hypertension, too.  Try to relate your medical conditions as primary and secondary conditions in your claim.

Have your spouse review the initial claim.  This can be important  if your spouse or other family member is a stronger writer. Make the claims process a family affair. A VA disability award and retroactive pay can greatly improve the economics in your family.

At this point you are ready to file pro se. You have read the two books, you have found DCs that correspond to you medical complaints and you have DBQs or letters from you physicians on your medical conditions. You have connected your primary and secondary medical conditions which are often referred to as residual conditions.

You have all the tools you need for further research and for the preparation of additional documentation.

You can file VA Form 21-526 (Veteran's Application for Compensation or Pension) in the VARO's Veterans Center or file a VONAPP online. See https://vabenefits.vba.va.gov/vonapp/main.asp.

Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA

  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.

Monday, December 23, 2013

Low cost sound for a flat screen screen TV

The new flat screen high definition TVs are great and most have many input an outputs on the back panel of the TV.

TV sound has always been marginal, but it can be improved inexpensively without buying a $200 sound bar.

If you want to upgrade your TVs audio, first make sure you have either red and white RCA output ports or Digital Audio Output.

 RCA ports

Rightardia will address the RCA setup. The digital setup isn't complicated but you will need a preamp that takes a digital fiber optic input. Digtial sound like Dolby or DTS may have to be disabled to get the digital preamp to work correctly which seems counter-intuitive.
Pyle PFA200 preamp
What you will need for this project:
1. TV audio preamp (Pyle PFA 200 Preamp)
2. 2-4" bookshelf speaker (Pyle 3" 100 Watt Mini Cube speaker pair)
3. RCA patch cable
4. speaker wire

First power down the TV and the PFA200 or similar preamp if you have already hooked up power. Use the red and white RCA cable to connect the TV to the preamp. The white RCA jack is for the left speaker and the red is for the right.

You will then need speaker wire to connect the preamp to your speakers. You can even use use PC speakers if the speakers have an 8 OHM impedance. You will probably. have to cut of the RCA cable on the PC speakers to do this. Rightardia purchased Pyle 3" 100 Watt bookshelf speakers that had high ratings on the Amazon web site. Note that the speaker wire clamps have red and black connectors for the left and right side speakers.

RCA patch cable
Never hook up the yellow video connector of the patch cable to the white or red ports. You will destroy the preamp of blow a speaker if you do.

Turn on the TV and the preamp on and enjoy the improved sound. The TV controller should be able to adjust the audio volume.

Try to match the audio.volume of the speakers to the output of the the TV. If you don't match the volumes, the TV controller may not be able to  mute the sound.

If you have a Roku or similar media player, you will be impressed by the sound quality for Pandora radio.

The overall cost of this project was under $50.00.


Subscribe to the Rightardia feed: http://feeds.feedburner.com/blogspot/UFPYA

  Creative Commons License

Rightardia by Rightard Whitey of Rightardia is licensed under a Creative Commons Attribution 3.0 Unported License.

Permissions beyond the scope of this license may be available at rightardia@gmail.com.